Home Hardware support Sellick Setup Manual

Inovus support centre

Hardware support

Sellick Setup Manual

Welcome to the step-by-step assembly guide for the Sellick. Whether you prefer step by step instructions or a video demonstration, this guide will walk you through the assembly process.

Before you begin, take a moment to review the package's contents and acquaint yourself with the included components. The following content has been crafted to provide you with all the insights required to transform individual parts into a functional and invaluable tool for honing your surgical skills.

Step-by-Step guide

Let's start assembling and enhancing your surgical skills, one step at a time.

Step 1

Open the box and remove the base unit, neck section and wires.

Step 2

Place the neck section into the recess in the base unit. Make sure the thyroid end of the neck section points towards the power input end of the device.

Step 3

Ensure the sellick® is placed on a desk or table top and then insert the USB power source.

Step 4

Once plugged into the power the display lights should show up. If numbers do not appear, press down once on the neck section to re-set the device.

Step 5

Press down on the neck section and pressure (Newtons) will read out in real time.

Step 6

The timer starts with pressure and stops on release. To re-set the timer push down and release the neck section once.

Step 7

Excess cricoid pressure over 35N will cause flashing red lights to appear.

Step 8

Lateral and rostral pressure is indicated by constant blue lights.

Assembly Video

View the assembly video for the Sellick Cricoid Pressure Trainer

Downloads

You can save the Sellick Setup Manual below. Or print this page for a hard copy version.

Was this article helpful?

We’re sorry to hear that.

Please can you give us some feedback to improve this page?

If you’d like a member of our support team to get back to you, please send a message to support@inovus.org