HystAR Pro Setup Manual

Step 1

When opening your simulator it
is recommended that you unpack all package contents and arrange them before starting construction.

Step 2

Start the assembly of your sim station by screwing the 4x bolts into the underside of the base. You can do this using the allen key provided.

Step 3

Now the base is attached to the main column you are ready to attach the top box.

Step 4

Locate the 4x bolts provided to attach the top box.

Step 5

Insert two bolts into the side of the
sim station main column and top box, screwing in place with the allen key provided.

Step 6

Ensure the bolts are finger tightened initially whilst you move onto the next step.

Step 7

Repeat this process on the other side of the sim station.

Step 8

Tighten all screws with allen key provided. The top box should now be securely attached to the main column.

Step 9

Locate the main column lead on the underside of the sim station box.

Step 10

Secure the lead in place with the connector as shown.

Step 11

Taking the Z-shaped monitor bracket
attach to the underside of the top box
of the sim station using the 2x nuts provided.

Step 12

Tighten the nuts to ensure the bracket is secured in place.

Step 13

Locate the angled tv bracket arm. (There are further instructions included with the monitor arm should you require them).

Step 14

Insert the bolt on the base of the the monitor stand into the hole on the top of the Z-shaped bracket now attached to the sim station.

Step 15

Locate the handle and tighten onto the underside of the bolt as indicated.

Step 16

Ensure the bolt is tightened.

Step 17

Locate 4x bolts and thread through the bracket and into the back of the monitor.

Step 18

Ensure the bolts are securely tightened.

Step 19

Align the U-shaped bracket with the
bolt holes on the top of the sim station
and secure using the thumb screws provided.

Step 20

You may now place the uterus housing onto the U-shaped bracket. Please note this is a push fit fixture.

Step 21

Insert the scope into the introducer.

Step 22

Place the hysterscope in the holes provided on the left hand side of the U-shaped bracket.

Step 23

Attach the camera to the scope.

Step 24

Attach the fibre optic light lead to the scope.

Step 25

Insert the fibre optic light lead into the back of the sim station.

Step 26

Plug the power cables into the relevant ports at the back of the sim station as shown. (Please note the monitor stand is not shown here just for clarity of plug positioning)

Step 27

Plug the 3 cables into the relevant ports in the underside of the monitor.

Step 28

Turn the system on using the power switch on the front of the sim station. 

Once the computer has loaded up, select the HystAR icon on the touch screen monitor and follow the instructions inside the software.